翻訳と辞書
Words near each other
・ Fiber optic sensor
・ Fiber optic splitter
・ Fiber optical thermometer
・ Fiber pull-out
・ Fiber pushout test
・ Fiber roll
・ Fiber rope
・ Fiber simulation
・ Fiber tapping
・ Fiber to the premises by country
・ Fiber to the premises in the United States
・ Fiber to the telecom enclosure
・ Fiber to the x
・ Fiber Twig
・ Fiber type
Fiber volume ratio
・ Fiber-optic communication
・ Fiber-optic Improved Next-generation Doppler Search for Exo-Earths
・ Fiber-optic inter-repeater link
・ Fiber-Optic Link Around the Globe
・ Fiber-reinforced composite
・ Fiber-reinforced concrete
・ Fibera KK-1e Utu
・ Fiberboard
・ Fibered knot
・ Fibered manifold
・ Fiberfab
・ Fiberfab Avenger GT
・ Fiberfab Valkyrie
・ Fiberforge


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Fiber volume ratio : ウィキペディア英語版
Fiber volume ratio

Fiber volume ratio is an important mathematical element in composite engineering. Fiber volume ratio, or fiber volume fraction, is the percentage of fiber volume in the entire volume of a fiber-reinforced composite material.〔Derek Hull. (1981).''An Introduction to Composite Materials''. Cambridge University Press.〕 When manufacturing polymer composites, fibers are impregnated with resin. The amount of resin to fiber ratio is calculated by the geometric organization of the fibers, which affects the amount of resin that can enter the composite. The impregnation around the fibers is highly dependent on the orientation of the fibers and the architecture of the fibers. The geometric analysis of the composite can be seen in the cross-section of the composite. Voids are often formed in a composite structure throughout the manufacturing process and must be calculated into the total fiber volume fraction of the composite. The fraction of fiber reinforcement is very important in determining the overall mechanical properties of a composite. A higher fiber volume fraction typically results in better mechanical properties of the composite.〔A. Endruweit, F. Gommer, A.C. Long. ''Stochastic analysis of fibre volume fraction and permeability in fibre bundles with random filament arrangement'', Composites Part A: Applied Science and Manufacturing, Volume 49, June 2013, Pages 109-118, ISSN 1359-835X.〕
Calculating the volume of fiber ratio in a composite is relatively simple. The volume fiber fraction can be calculated using a combination of weights, densities, elastic moduli, stresses in respective directions, poison's ratios, and volumes of the matrix (resin system), fibers, and voids.
V_f = \frac\! 〔Isaac M Daniel, Ori Ishai. (2006).''Engineering Mechanics of Composite Materials''. 2nd ed. Oxford University Press. ISBN 978-0-19-532244-6〕
where:
: V_f is the fiber volume ratio
and
: v_f is the volume of fibers
: v_c is the volume of the composite
==Methods to Determine Fiber Volume Fractions==


抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Fiber volume ratio」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.